瑞晨建材
电话:0571-56017206
电话0571-88755169

新闻中心

电话:0571-56017206

传真:0571-85853340

地址:杭州市余杭区余杭镇义桥工业园区

当前位置:首页 > 新闻中心 > 行业资讯行业资讯

落水管圆管安装的方法
文章来源:www.larcjc.cn  作者:瑞晨建材  更新时间:2019-06-01 18:37:05  Tag:  浏览:13

 1、按照图纸标示落水管位置间隔1.5--2.0米设置固定支架;

2、管材在量取长度之后,可用钢锯、手工割锯、砂轮切割机割锯。割锯后,断面应保持平整,用钢锉除去毛边并倒角;
3、用带清洁剂的干布清洁管材外壁和管件内壁,去除污染物;
4、将溶解剂均匀涂于管材外壁和管件内壁,然后迅速把管材插入管件,用力旋转至少1/4圈以保证接合紧固无漏隙;
5、粘接完毕后把多余溶剂擦掉,将管材固定在位置上维持一段时间,60min内不可受外力影响;
6、待管件完全粘接后,放到设置的支架内拧紧支架固定件即安装完成。
 
1, according to the drawings indicating the location of the falling pipe interval of 1.5-2 .0 meters set up a fixed bracket;
2, after the length of the pipe is measured, the saw can be cut with a steel saw, a hand-cut saw, and a grinding wheel cutter. After cutting the saw, the section should be kept flat and the bristle should be removed with a steel file and the corner should be reversed;
3, clean the outer wall of the pipe and the inner wall of the pipe with a dry cloth with detergent to remove pollutants;
4, evenly coated solution on the outer wall of the pipe and the inner wall of the pipe, and then quickly inserted the pipe into the pipe, rotation at least 1/4 circle to ensure that there is no leakage gap;
5, after the adhesion is completed, the excess solvent is erased, the pipe is fixed in the position for a period of time, and the 60 min can not be affected by external forces;
6, after the pipe parts are fully bonded, put into the set bracket to tighten the bracket fixed parts to complete the installation.
  上一篇:落水管方管安装的方法      下一篇:树脂落水系统怎么样
推荐阅读新闻:
  • 怎么样确定pvc排水立管三通安装
  • 雨水斗的作用
  • 挑选落水系统管道的技巧
  • 彩铝落水系统验收的技巧
  • 落水管安装需要考虑到的方面
  • 落水管开槽有哪些注意事项
  • 落水管的安装和连接